Single Side / Blind Side


Forming America
is the sole provider of the Seawolf Blindsided Wall Forming System.  The Seawolf™ System utilizes Symons Steel-Ply™ modular concrete forms for the exposed concrete face and plywood on the inaccessible side.

This unique approach to one sided wall forming eliminates the need for “weld-on” ties, concrete/rock/wood anchors, or “A-frame” supports.  The benefit of using this system results in dramatic labor and equipment savings.

The finished product is a remarkably straight wall at a remarkably low cost.  Forming America can provide: modular forms for rent or purchase, discounted used quality plywood, and the unique “torpedo ties” for a complete blindsided wall system.  (Rebar by contractor)

Contact our sales team for additional information.


Rock anchors used in sound rock or concrete allows one-sided forming of walls or similar applications to be completed quickly and economically.  The rock anchor is threaded onto the coil rod until the rod hits the backstop of the anchor.  The plastic retaining sleeve is removed and the rock anchor/coil rod assembly is placed into the bore hole.  The assembly is installed so that the anchor backstop “bottoms” in the bore hole.  Tightening the coil rod will draw the anchor wedges forward to expand the anchor’s shell.


Steel Channel Waler

These one-sided wall forming components are designed to fit the 5″ or 8″ walers used with most forming systems.  However, some of the systems require the use of a sill (1½”) to position and connect walers to formwork as an assembly.  If the waler assembly and the forms are lifted separately, a waler connection (positive connection) is not necessary.

Symons Soldier

Standard form systems, such as Steel-Ply®, Alisply™, Rapid Clamp™, or Versiform can be combined with Symons Soldiers to create a tieless concrete forming scheme for one-sided wall forming, offering substantial savings in time and labor costs.  Hardware and accessories, including One Sided Brackets and Jack Brackets, simplify assembly and adjustments for one-sided wall forming applications.